Cut the Window-Blocking-Inner parts and attach them around the perimeter of each Window-Box. This blocking will serve as a surface to secure the wall coverings.
Ensure the blocking is flush with the surrounding struts.
Measure, cut, and attach each support block. These can be used to pull or push a warped window box into place.
Detail shot showing the Window-Blocking-Inner parts and the smaller support blocks.
Detail shot showing the completed window blocking.
Cut the Egress-Blocking-Inner parts and attach them around the perimeter of the Egress-Box.
Next Step
© 2025 Dodeca Domes. All rights reserved.